How To Reset Genie 1028 Garage Door Opener: A Comprehensive Guide

If you own a Genie 1028 garage door opener and need to reset it, you might find the process a bit challenging without proper guidance. Whether you’re troubleshooting an issue or setting up your system for the first time, resetting your Genie 1028 garage door opener can help resolve various problems. In this comprehensive guide, we will walk you through the detailed steps on how to reset Genie 1028 garage door opener, ensuring a smooth and hassle-free experience.

How To Reset Genie 1028 Garage Door Opener

Understanding the Genie 1028 Garage Door Opener

Before diving into the reset process, it’s important to understand the functionality and components of the Genie 1028 garage door opener.

Key Features of the Genie 1028

The Genie 1028 model is known for its reliability and ease of use. Key features include:

  • Chain Drive System: Provides reliable and durable performance.
  • Intellicode Security: Changes the access code with each use to prevent unauthorized access.
  • Safe-T-Beam System: Uses an infrared beam to detect objects in the door’s path, preventing accidents.
  • Wall Console and Remote Control: Allows for convenient operation of the garage door opener.

Common Issues Requiring a Reset

Common situations where you might need to reset your Genie 1028 garage door opener include:

  • Loss of Remote Functionality: If the remote control stops working.
  • Door Not Responding: When the door does not open or close as expected.
  • Security Code Issues: If you need to reset the access codes for security reasons.

Tools and Materials Needed

To reset your Genie 1028 garage door opener, you will need:

  • The owner’s manual for reference (if available)
  • A ladder to reach the garage door opener unit
  • A working remote control or wall console
  • A pen and paper to note down any necessary information

Step-by-Step Guide on How To Reset Genie 1028 Garage Door Opener

1: Prepare for the Reset

Ensure Safety First

  • Disconnect the garage door opener from the power source by unplugging it or turning off the circuit breaker.
  • Ensure the garage door is in the fully closed position.

2: Locate the Learn Button

  1. Access the Garage Door Opener: Use a ladder to reach the garage door opener unit mounted on the ceiling.
  2. Find the Learn Button: The Learn button is typically located near the antenna wire on the motor unit. It may be labeled as “Learn” or have an LED light next to it.

3: Clear Existing Codes

  1. Press and Hold the Learn Button: Press and hold the Learn button until the LED light turns off (usually takes about 10 seconds). This action clears all existing codes and resets the system.
  2. Confirm Reset: Release the Learn button once the LED light turns off. The unit is now reset and ready for reprogramming.

4: Reprogram the Remote Control

  1. Press the Learn Button Again: Briefly press and release the Learn button. The LED light will start blinking, indicating it is in programming mode.
  2. Activate the Remote Control: Within 30 seconds, press and hold the button on the remote control that you want to program. Hold it until the LED light on the motor unit stops blinking and turns solid, indicating successful programming.

5: Test the Garage Door Opener

  1. Reconnect the Power: Plug the garage door opener back into the power source or turn on the circuit breaker.
  2. Test the Remote Control: Press the programmed button on the remote control to test if the garage door opens and closes smoothly.

6: Reprogram Additional Remotes (if necessary)

  1. Repeat the Process: For any additional remotes, repeat steps 4 and 5 to program each remote control to the garage door opener.

Troubleshooting Tips

If you encounter issues during the reset or reprogramming process, here are some troubleshooting tips:

Remote Control Not Working

  • Check Batteries: Ensure the remote control batteries are fresh and properly installed.
  • Reprogram the Remote: If the remote does not respond, repeat the reprogramming steps.
  • Interference: Ensure there are no electronic devices nearby that could cause interference with the remote signal.

Door Not Opening or Closing Properly

  • Sensor Alignment: Check the alignment of the Safe-T-Beam sensors and ensure they are not obstructed.
  • Manual Operation: Test the door manually to ensure it is not sticking or unbalanced.

Maintenance Tips for Genie 1028 Garage Door Opener

Regular maintenance can help prevent issues and extend the lifespan of your Genie 1028 garage door opener. Here are some maintenance tips:

Lubricate Moving Parts

  • Lubricate the Chain: Apply a silicone-based lubricant to the chain drive system every six months to ensure smooth operation.

Inspect and Tighten Hardware

  • Check for Loose Hardware: Periodically inspect and tighten any loose bolts, screws, and brackets.

Test the Safety Features

  • Test the Safe-T-Beam System: Regularly test the safety beam by placing an object in the door’s path to ensure it reverses properly.

Balance the Door

  • Check Door Balance: Disconnect the opener and manually lift the door halfway. It should stay in place if properly balanced. If not, it may require adjustment.


Resetting your Genie 1028 garage door opener is a straightforward process that can resolve many common issues. By following this comprehensive guide, you can ensure that your garage door opener operates efficiently and securely. Regular maintenance and prompt troubleshooting of any problems will help you get the most out of your Genie 1028 garage door opener.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top