How To Install A Genie Belt Drive Garage Door Opener Like a Pro

Are you considering installing a Genie belt drive garage door opener but not sure where to start? In this comprehensive guide, we’ll walk you through the step-by-step process of installing a Genie belt drive opener, providing expert tips and advice along the way. Whether you’re a seasoned DIY enthusiast or a first-time installer, you’ll find everything you need to know to complete the installation successfully.

How To Install A Genie Belt Drive Garage Door Opener

How To Install A Genie Belt Drive Garage Door Opener: Step-by-Step Guide

Step 1: Gather Your Tools and Materials

Before you begin, make sure you have all the necessary tools and materials on hand. This may include a ladder, power drill, screwdriver, wrenches, measuring tape, and the components included with your Genie belt drive garage door opener kit.

Step 2: Prepare Your Garage Door

Start by preparing your garage door for installation. This may involve clearing out any clutter or obstacles in the vicinity of the door and ensuring that the door is in good working condition. Check for any signs of damage or wear that may need to be addressed before proceeding.

Step 3: Install the Rail Assembly

Next, assemble the rail according to the manufacturer’s instructions. This typically involves connecting the rail sections and attaching them to the ceiling of your garage using mounting brackets. Make sure the rail is level and securely fastened in place.

Step 4: Mount the Opener Head

Once the rail is installed, mount the opener head to the ceiling near the center of the garage door. Use the provided mounting brackets and hardware to secure the opener in place, ensuring that it is level and aligned with the rail.

Step 5: Attach the Belt Drive

With the opener head mounted, it’s time to attach the belt drive to the rail. Slide the belt drive onto the rail and secure it in place using the provided hardware. Make sure the belt is tensioned properly and aligned with the pulleys.

Step 6: Install the Trolley and Door Bracket

Next, install the trolley assembly on the rail and attach the door bracket to the top section of your garage door. Connect the trolley to the door bracket using the provided hardware, making sure everything is aligned and secure.

Step 7: Wire the Opener

Once the mechanical components are in place, it’s time to wire the opener. Follow the wiring diagram provided in the instruction manual to connect the opener to your electrical supply and any optional accessories, such as safety sensors or remote controls.

Step 8: Test the Opener

Before you finalize the installation, test the opener to ensure everything is working correctly. Use the manual controls or a remote transmitter to open and close the garage door, checking for smooth operation and proper alignment.

Step 9: Adjust Settings and Programming

Once the opener is installed and tested, adjust any settings or programming options according to your preferences. This may include setting the travel limits, adjusting the force settings, and programming remote controls or keypads.


Installing a Genie belt drive garage door opener may seem daunting, but with the right tools, materials, and know-how, you can succeed. Follow this step-by-step guide, take your time, and enjoy the convenience and reliability of your new Genie opener for years.

Scroll to Top