Replacement Button For Genie Intellicode Garage Door Remote Opener: Everything You Need to Know to Fix Your Remote

If your Genie Intellicode garage door remote opener has a malfunctioning or broken button, you don’t have to replace the entire remote. Learning about the replacement button for Genie Intellicode garage door remote opener can save you time, money, and frustration. This article covers everything from identifying the right replacement button, how to install it, and tips for maintaining your remote to extend its lifespan.

Replacement Button For Genie Intellicode Garage Door Remote Opener

Understanding the Genie Intellicode Garage Door Remote Opener

The Genie Intellicode garage door remote opener is widely appreciated for its reliable performance and advanced security features. The Intellicode technology uses rolling codes to prevent unauthorized access and hacking attempts, making it a popular choice among homeowners.

The remote opener typically features multiple buttons for different garage doors or functions. However, these buttons can wear out or get damaged over time due to frequent use, accidental drops, or exposure to dirt and moisture.

When the buttons stop responding or physically break, a full remote replacement might seem necessary, but a simple replacement button for Genie Intellicode garage door remote opener can be a cost-effective fix.


Why Replace a Button Instead of the Whole Remote?

  • Cost Efficiency: Purchasing just the replacement button is often much cheaper than buying a new remote.
  • Environmental Impact: Repairing instead of replacing reduces electronic waste.
  • Convenience: You can keep your existing remote and continue using it without the hassle of reprogramming a new device.
  • Preservation of Customization: Your remote might already be programmed with multiple devices; replacing the button keeps those settings intact.

How to Identify the Right Replacement Button for Your Genie Intellicode Remote

When looking for a replacement button, it’s crucial to find one that matches your remote model exactly. Not all buttons are interchangeable across different Genie remotes or Intellicode models.

Step 1: Identify Your Remote Model Number

  • Check the back or inside the battery compartment of your remote for the model number.
  • Common Genie Intellicode models include Genie GIT-1, Genie GIT-2, and others.

Step 2: Check Button Size, Shape, and Style

  • Buttons vary in shape (round, square, rectangular) and size.
  • Take a clear photo or measurements of the damaged button for reference.

Step 3: Purchase from Trusted Sources

  • Official Genie parts dealers or certified online retailers are preferred.
  • Avoid cheap knock-offs, which may not be durable or compatible.

Replacement Button For Genie Intellicode Garage Door Remote Opener: Installation Guide

Replacing a button on your Genie Intellicode garage door remote is a straightforward process if you follow these steps carefully.

Tools You Will Need:

  • Small screwdriver (usually Phillips or flathead)
  • Replacement button specific to your remote model
  • Tweezers or needle-nose pliers (optional)
  • Soft cloth or work mat

Step 1: Open the Remote Case

  • Carefully remove the screws on the back of the remote.
  • Gently separate the two halves of the remote casing.
  • Be mindful of the circuit board and internal components.

Step 2: Remove the Broken Button

  • Locate the damaged button on the circuit board.
  • Use tweezers or your fingers to gently lift and remove the broken button.
  • Clean any debris or residue around the button area.

Step 3: Insert the Replacement Button

  • Align the new button in the exact position as the old one.
  • Ensure it sits flush with the circuit board and remote casing.
  • Test the button for tactile feedback before closing the remote.

Step 4: Reassemble the Remote

  • Carefully snap the remote halves back together.
  • Replace and tighten the screws.
  • Test the remote with your garage door to confirm functionality.

Troubleshooting Common Issues with Replacement Buttons

After installing your replacement button for Genie Intellicode garage door remote opener, you may face some common challenges:

  • Button Feels Stuck or Doesn’t Press: Make sure the button is aligned properly and there is no obstruction.
  • Remote Does Not Respond: Check the remote’s battery and replace if necessary. Also, verify that the button makes proper contact with the circuit board.
  • Intermittent Operation: This could be due to dirt or corrosion on contacts; clean carefully with a cotton swab and isopropyl alcohol.

Tips for Maintaining Your Genie Intellicode Remote Buttons

To extend the life of your remote buttons and avoid frequent replacements, consider these care tips:

  • Keep Your Remote Dry: Avoid exposing your remote to moisture or extreme temperatures.
  • Clean Regularly: Use a soft cloth to wipe the remote surface and prevent dirt buildup around buttons.
  • Avoid Excessive Force: Press buttons gently to prevent damage to the internal mechanism.
  • Use a Protective Case: Silicone or plastic cases help protect your remote from accidental drops and wear.

When to Consider Replacing the Entire Remote Instead

While replacing individual buttons is cost-effective, there are times when buying a new remote is advisable:

  • The remote case is cracked or severely damaged.
  • Multiple buttons are malfunctioning or broken.
  • The remote’s electronics or circuit board show signs of failure.
  • You want an upgraded model with enhanced features or range.

Where to Buy Genuine Replacement Buttons for Genie Intellicode Remotes

For peace of mind and guaranteed compatibility, buy replacement buttons from:

  • Official Genie Parts Distributors: Authorized dealers usually have original parts.
  • Genie Customer Support: Direct assistance can help you locate the exact replacement.
  • Reputable Online Retailers: Amazon, eBay (check reviews and seller credibility), and specialty garage door parts stores.

Conclusion: Save Money and Extend Your Remote’s Life with Replacement Buttons

Knowing about the replacement button for Genie Intellicode garage door remote opener empowers you to fix your remote efficiently and affordably. Whether you are dealing with a worn-out button or accidental damage, replacing just the button is often a simple DIY fix that avoids the cost and hassle of buying a new remote.

By carefully identifying the correct replacement button, following proper installation steps, and maintaining your remote, you can enjoy seamless garage door access for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top