How To Program Genie Garage Door Opener Model GITR 3: A Complete Guide

Introduction

The Genie GITR 3 garage door opener remote is a widely used three-button transmitter that works with Genie’s Intellicode technology. If you’ve recently purchased a GITR 3 remote or need to reprogram it, you’re in the right place.

How To Program Genie Garage Door Opener Model Gitr 3

In this guide, we’ll walk you through how to program Genie garage door opener model GITR 3 step by step. Whether you’re setting it up for the first time or troubleshooting issues, this comprehensive guide will ensure your remote works smoothly with your Genie garage door opener.


Understanding the Genie Garage Door Opener Model GITR 3

Before diving into the programming steps, let’s explore what makes the Genie GITR 3 remote a great option for controlling your garage door.

Key Features of the Genie GITR 3 Remote

  • Three-button design – Can control up to three garage doors or Genie devices.
  • Intellicode rolling code technology – Enhances security by generating a new access code each time the remote is used.
  • Easy programming – Simple setup with Genie garage door openers.
  • Compact and durable – Designed for long-lasting performance.
  • Battery-powered – Uses a coin-cell battery (CR2032) for efficient operation.

Is My Garage Door Opener Compatible with the GITR 3 Remote?

The Genie GITR 3 remote is compatible with Genie garage door openers that use Intellicode security technology. To check compatibility:

  • Look for the Intellicode logo on your garage door opener.
  • If your opener was manufactured after 1995, it likely supports the GITR 3 remote.

How To Program Genie Garage Door Opener Model GITR 3

Follow these step-by-step instructions to program your Genie GITR 3 remote to your garage door opener.

1: Locate the Learn Button on Your Genie Garage Door Opener

The Learn button is essential for pairing your GITR 3 remote with your garage door opener.

  1. Go to your Genie garage door opener motor unit (typically mounted on the ceiling of the garage).
  2. Locate the “Learn” or “Program” button.
    • This button is often found under the light cover or near the antenna wire.
  3. Once found, be ready to press it in the next steps.

2: Prepare the Genie GITR 3 Remote for Programming

Before you begin programming, make sure:

  • The remote has a working battery (replace the CR2032 battery if necessary).
  • You are within range of the garage door opener.

3: Enter Programming Mode on the Genie Opener

  1. Press and release the “Learn” button on the garage door opener.
    • The LED light on the opener will start flashing, indicating it’s in programming mode.
  2. Within 30 seconds, move to the next step.

4: Program the GITR 3 Remote

  1. On the Genie GITR 3 remote, press and hold the button you want to program.
  2. Hold the button until the garage door opener’s LED light blinks or the door moves slightly.
  3. Release the button once you see the confirmation signal.

5: Test the Remote

  1. Press the programmed button on your Genie GITR 3 remote.
  2. If the garage door opens or closes, the remote is successfully programmed.
  3. If the door does not respond, repeat Steps 3 and 4 to ensure correct programming.

How to Program Multiple Garage Doors with the Genie GITR 3 Remote

Since the Genie GITR 3 remote has three buttons, you can program it to control up to three different Genie garage doors.

To program additional doors:

  1. Repeat Steps 3-5 using a different button on the remote.
  2. Each button can be assigned to a different Genie garage door opener.

Troubleshooting Common Issues

If your Genie GITR 3 remote isn’t working properly, try these troubleshooting steps:

1. The Remote Doesn’t Work After Programming

  • Check the battery – If the remote is unresponsive, replace the CR2032 battery.
  • Repeat the programming process – Sometimes, the remote requires multiple attempts to sync.
  • Ensure you pressed the correct button on the remote.

2. The Garage Door Opener Doesn’t Respond

  • Make sure you pressed the “Learn” button on the opener before programming.
  • Move closer to the opener while programming.
  • Check for signal interference from nearby electronic devices.

3. The Remote Suddenly Stops Working

  • Reprogram the remote using the steps above.
  • Replace the battery if it’s been in use for a long time.
  • Reset the garage door opener (unplug it for 30 seconds and plug it back in).

Frequently Asked Questions (FAQs)

1. Can I Program the Genie GITR 3 Remote for a Non-Genie Garage Door Opener?

No, the GITR 3 remote is specifically designed for Genie garage door openers with Intellicode technology. If you have a non-Genie opener, consider using a universal garage door remote instead.

2. How Do I Erase the Previous Programming on My GITR 3 Remote?

To reset the remote:

  1. Press and hold all three buttons on the remote for 10 seconds.
  2. Release the buttons when the LED stops flashing.
  3. The remote is now cleared of all previous programming.

3. What If My Genie Garage Door Opener Has a DIP Switch Instead of a Learn Button?

Older Genie openers use DIP switches instead of rolling code technology. If your opener has DIP switches:

  1. Match the DIP switch settings on the remote to the ones inside the garage door opener unit.
  2. Save the settings and test the remote.

4. Can I Use the Genie GITR 3 Remote for a Gate Opener?

Yes, if the gate opener uses Intellicode technology, you can program the GITR 3 remote the same way as a garage door opener.


Final Thoughts

Learning how to program Genie garage door opener model GITR 3 is a simple process that enhances your garage access convenience. By following the step-by-step guide, you can successfully sync your GITR 3 remote with your Genie garage door opener in just a few minutes.

If you encounter issues, refer to the troubleshooting section or reset your remote and try again. Once properly programmed, you’ll enjoy seamless and secure garage door access with the press of a button.

If this guide was helpful, share it with others who might need assistance setting up their Genie GITR 3 remote!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top