The Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears play a crucial role in the operation of your garage door opener. These gears are responsible for transferring power from the motor to the drive system, allowing smooth and efficient door movement. Over time, wear and tear can cause the internal gears to degrade, leading to performance issues such as a stuck door, grinding noises, or complete opener failure.
If your Genie Reliag 800 garage door opener is malfunctioning, replacing the motor internal gears might be the solution. In this comprehensive guide, we will discuss the function of these gears, how to identify signs of wear, and provide step-by-step instructions for replacing them.
Understanding Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears
What Are Motor Internal Gears?
The Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears are an essential component of the opener’s motor assembly. They work by transmitting rotational energy from the motor to the chain, belt, or screw drive system, ultimately raising and lowering the garage door.
Key Features of Genie 37030A.S Reliag 800 Internal Gears:
- Durable plastic and metal construction for longevity.
- Designed specifically for the Genie Reliag 800 model to ensure compatibility.
- Optimized for smooth and quiet operation, reducing noise.
- Easy to replace with basic tools, making it a cost-effective repair.
Since these gears are subjected to frequent stress, they can wear out over time, requiring replacement to maintain optimal performance.
Signs That You Need to Replace Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears
Over time, the Genie Reliag 800 motor internal gears may wear down, causing the garage door opener to malfunction. Here are the most common signs that indicate it’s time for a replacement:
1. Grinding or Clicking Noises
- If you hear grinding, clicking, or clunking sounds when operating the garage door opener, the internal gears may be worn out or broken.
- This happens because the plastic gears lose their teeth, causing the motor to spin without effectively moving the door.
2. Garage Door Doesn’t Open or Close Completely
- If the motor runs but the door doesn’t move, the internal gears could be stripped.
- The opener might attempt to lift the door, but lack of grip from the worn gears prevents proper movement.
3. The Motor Runs but the Chain or Belt Doesn’t Move
- A sign of gear failure is when the motor spins freely but the chain or belt doesn’t engage.
- This typically means the drive gear is completely stripped and unable to transmit force.
4. Plastic Shavings or Debris Inside the Opener Housing
- If you notice small plastic shavings when opening the garage door opener housing, this indicates that the gears are wearing down.
- This is a sign that the gear teeth have deteriorated, and replacement is needed.
How to Replace Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears
If you’ve identified that your Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears need replacement, follow these step-by-step instructions to install new ones.
Tools Required:
- Phillips screwdriver
- Flat-head screwdriver
- Socket wrench set
- Pliers
- Ladder
- Replacement motor internal gears (Genie 37030A.S)
1: Disconnect Power
- Unplug the garage door opener from the electrical outlet.
- If your opener is hardwired, turn off the breaker to prevent electrical shock.
2: Remove the Garage Door Opener Cover
- Use a Phillips screwdriver to remove the screws securing the cover.
- Carefully lift off the cover to access the internal components.
3: Locate the Motor and Gears
- Find the motor drive assembly, which contains the internal gears.
- Identify the damaged or worn-out gear that needs replacement.
4: Remove the Old Gear
- Use a socket wrench to remove the retaining screws holding the gear assembly in place.
- Gently pull out the damaged gear. If it’s stuck, use pliers to loosen it.
5: Install the New Genie 37030A.S Motor Internal Gears
- Align the replacement gear properly within the motor assembly.
- Secure it with the original screws and ensure it spins smoothly.
6: Reassemble the Garage Door Opener
- Place the opener cover back on and tighten the screws.
- Reconnect power and test the opener to confirm it works properly.
7: Lubricate the Gears (Optional but recommended)
- Apply a thin layer of Genie-approved lubricant to the new gears for smoother operation.
After completing these steps, your Genie Reliag 800 garage door opener should work efficiently again.
Troubleshooting Common Issues After Replacing the Internal Gears
Even after replacing the Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears, you may encounter minor issues. Here’s how to fix them:
1. The Garage Door Opener Runs but the Door Doesn’t Move
✅ Check if the new gears are properly aligned with the drive system.
✅ Ensure the belt or chain tension is correctly adjusted.
2. Loud Grinding Noises Persist
✅ Apply lubrication to the gears and check for any loose screws.
✅ Inspect the motor shaft to make sure it isn’t misaligned.
3. The Garage Door Stops Midway
✅ Reset the force and limit settings on the opener.
✅ Ensure the safety sensors are properly aligned and free from obstructions.
Maintenance Tips to Extend the Life of Genie 37030A.S Reliag 800 Motor Internal Gears
To avoid frequent replacements and keep your garage door opener in top condition, follow these maintenance tips:
- Lubricate the gears every 6–12 months with a Genie-approved lubricant.
- Check for loose screws and bolts during routine maintenance.
- Inspect the chain or belt drive system to prevent excess strain on the motor gears.
- Clean the motor housing regularly to remove dust and debris.
Proper maintenance can extend the lifespan of your Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears and prevent costly repairs.
Conclusion
The Genie 37030A.S Reliag 800 Garage Door Opener Motor Internal Gears are an essential part of your garage door opener’s operation. If you notice grinding noises, slow response times, or gear failure, replacing them is a simple and effective solution.
By following the step-by-step replacement guide, troubleshooting tips, and maintenance recommendations, you can keep your Genie Reliag 800 garage door opener running smoothly for years.
If your garage door opener continues to have issues even after replacing the internal gears, consider consulting Genie customer support or a professional garage door technician for further assistance.
