Have you recently purchased a universal remote for your Genie garage door opener but are unsure how to program it? Programming a universal remote to operate your Genie garage door opener is a straightforward process that allows you to conveniently control your garage door with a single remote. In this guide, we’ll walk you through the steps to program a universal remote to your Genie garage door opener, ensuring seamless operation and enhanced convenience.
Program Universal Remote To Genie Garage Door Opener
To program your universal remote to your Genie garage door openers, follow these simple steps:
1. Locate the Learn Button
First, locate the “Learn” or “Program” button on your Genie garage door opener. This button is typically located near the antenna wire on the opener motor unit.
2. Press the Learn Button
Press and release the Learn button on your Genie garage door opener. The indicator light on the opener will begin to flash, indicating that it is in programming mode.
3. Press the Button on Your Universal Remote
Within 30 seconds of pressing the Learn button, press and hold the button on your universal remote that you wish to program to the opener. Hold the button until the indicator light on the opener motor unit stops flashing and remains lit.
4. Test the Remote
Once the indicator light on the opener motor unit stops flashing, release the button on your universal remote. Then, test the remote by pressing the programmed button to open or close the garage door. If the door responds accordingly, the programming was successful.
5. Repeat for Additional Buttons (Optional)
If your universal remote has multiple buttons and you wish to program them to operate different functions of the garage door opener, such as opening multiple doors or turning on lights, repeat the above steps for each button.
6. Finalize Programming
After programming all desired buttons on your universal remote, press the Learn button on the Genie garage door opener to exit programming mode. The indicator light should turn off, indicating that programming is complete.
Conclusion
Programming a universal remote to your Genie garage door opener is a simple yet essential task that enhances the convenience and accessibility of operating your garage door. By following the steps outlined in this guide, you can quickly and easily program your universal remote to your Genie openers, allowing for seamless control of your garage door.
