When your garage door remote suddenly stops working, the problem is often simple—a dead battery. If you’re searching for clear guidance on the Genie 33069S GITR-3 Garage Door Opener Remote Battery, you’re not alone. This complete guide explains the correct battery type, how to replace it safely, how long it should last, and how to fix common issues, all in a beginner-friendly way.
What Is the Genie 33069S GITR-3 Garage Door Opener Remote?
The Genie 33069S, also known as the GITR-3, is a 3-button garage door opener remote designed to control up to three Genie garage door openers or gates. It uses Intellicode® rolling code technology, which changes the access code after each use to improve home security.
This remote is manufactured by Genie, a well-known US brand specializing in residential and commercial garage door systems.
Which Battery Does the Genie 33069S GITR-3 Use?
Correct Battery Type
The Genie 33069S GITR-3 Garage Door Opener Remote Battery uses:
- CR2032 lithium coin battery
- 3 volts (3V)
This is a very common battery type, widely available online and in retail stores.
Why the CR2032 Battery Is Used
- Compact size
- Long shelf life
- Stable voltage output
- Reliable performance in temperature changes
For general background on lithium coin batteries, you can reference this neutral overview on Wikipedia:
https://en.wikipedia.org/wiki/Lithium_coin_cell
How Long Does the Genie GITR-3 Remote Battery Last?
Under normal conditions, a CR2032 battery in a Genie GITR-3 remote lasts:
- 12–24 months with regular use
- Shorter lifespan in very cold or hot climates
Factors That Affect Battery Life
- Frequency of use
- Temperature exposure (cars in summer or winter)
- Battery brand and quality
Expert Tip: Replacing the battery once a year helps prevent sudden failure at inconvenient times.
Signs Your Genie 33069S Remote Battery Is Dying
Look out for these common warning signs:
- Garage door only opens when you’re very close
- Remote works intermittently
- LED light on the remote is dim or not lighting
- Door doesn’t respond on the first press
These symptoms almost always indicate a weak battery.
How to Replace the Genie 33069S GITR-3 Garage Door Opener Remote Battery (Step-by-Step)
Replacing the battery is simple and takes less than 5 minutes.
What You’ll Need
- 1 × CR2032 lithium battery
- Small flathead screwdriver (or coin)
Step 1: Open the Remote Case
- Turn the remote over
- Insert a flathead screwdriver or coin into the slot
- Gently twist to separate the cover
Step 2: Remove the Old Battery
- Carefully lift out the old CR2032 battery
- Note the battery orientation before removal
Step 3: Insert the New Battery
- Place the new CR2032 battery with the positive (+) side facing up
- Make sure it sits flat in the holder
Step 4: Close the Remote
- Snap the cover back into place
- Press until you hear a firm click
Step 5: Test the Remote
- Press any button
- The LED should light brightly and the door should respond
Do You Need to Reprogram the Remote After Battery Replacement?
No.
Replacing the Genie 33069S GITR-3 Garage Door Opener Remote Battery does not erase programming. Your remote should work immediately after installing the new battery.
If it doesn’t, reprogramming may be needed, but this is rare.
Common Battery Replacement Mistakes to Avoid
- Inserting the battery upside down
- Touching battery surfaces excessively (oils can reduce contact quality)
- Using expired or low-quality batteries
- Not fully closing the remote housing
Avoiding these mistakes ensures maximum battery life and reliable operation.
CR2032 vs Other Coin Batteries (Comparison)
| Battery Type | Voltage | Compatible with GITR-3 |
|---|---|---|
| CR2032 | 3V | ✅ Yes |
| CR2025 | 3V | ❌ No (too thin) |
| CR2016 | 3V | ❌ No (too thin) |
Important: Always use CR2032, not thinner substitutes, even if they appear to fit.
Why Your Remote Still Might Not Work After Replacing the Battery
If a new battery doesn’t solve the issue, check the following:
1) Dirty Battery Contacts
- Clean gently with a dry cotton swab
2) Signal Interference
- Nearby electronics or LED bulbs can interfere
3) Lost Programming
- Rare, but can happen after electrical surges
4) Worn Remote Buttons
- Older remotes may need replacement if buttons no longer make contact
Security Tips When Changing Remote Batteries
- Replace batteries indoors to avoid losing parts
- If a remote is lost, erase all remotes from the opener
- Reprogram only remotes you still own
- Never leave remotes in unlocked vehicles
Is It Better to Replace the Battery or the Remote?
Replace the Battery If:
- The remote is under 10 years old
- Buttons still feel responsive
- The case is intact
Replace the Remote If:
- Buttons are worn or cracked
- Battery drains unusually fast
- Remote works inconsistently even with new batteries
In most cases, a simple battery replacement is all that’s needed.
Estimated Cost of Replacement
- CR2032 battery: $2–$6
- Multi-pack (recommended): $5–$10
Cost Tip: Buying a 4–6 pack is more economical and ensures you always have a spare.
FAQ – Genie 33069S GITR-3 Garage Door Opener Remote Battery
Q1: What battery does the Genie 33069S GITR-3 use?
It uses one CR2032 3V lithium coin battery.
Q2: How often should I replace the battery?
Every 12–24 months, or sooner if performance drops.
Q3: Will replacing the battery erase my remote settings?
No. Programming is retained during battery replacement.
Q4: Why does my remote work only up close?
This is a classic sign of a weak battery.
Q5: Can I use rechargeable CR2032 batteries?
Not recommended. Standard lithium CR2032 batteries provide more stable voltage.
Conclusion
The Genie 33069S GITR-3 Garage Door Opener Remote Battery is a small component with a big impact on daily convenience and security. Using the correct CR2032 battery, replacing it on time, and following proper handling steps ensures your remote works reliably year-round. With just a few minutes of effort, you can avoid frustration and unexpected lockouts. If this guide helped you, share it on social media so others can quickly solve the same problem with confidence.
