How To Program A Genie Excelerator II Garage Door Opener – A Complete Step-by-Step Guide

The Genie Excelerator II garage door opener is known for its fast operation, reliability, and smooth performance. However, to ensure it functions properly, you may need to program the remote, keypad, or wall console at some point. Whether you’re setting up a new remote, reprogramming an existing one, or troubleshooting a non-working unit, this guide will walk you through how to program a Genie Excelerator II garage door opener effectively.

How To Program A Genie Excelerator Ll Garage Door Opener

Why Do You Need to Program Your Genie Excelerator II?

Programming your Genie Excelerator II garage door opener is essential in several situations, such as:

  • Setting up a new remote control after purchasing a replacement.
  • Syncing additional remotes for multiple users.
  • Reprogramming after power loss to restore proper functionality.
  • Configuring a wireless keypad for secure access without a remote.
  • Troubleshooting a malfunctioning remote that has lost its connection.

Now, let’s dive into the step-by-step process to program your Genie Excelerator II garage door opener.


How To Program A Genie Excelerator II Garage Door Opener

The Genie Excelerator II garage door opener uses Intellicode rolling code technology, which changes the access code every time the remote is used. This ensures enhanced security and prevents unauthorized access.

Step 1: Locate the Learn Button on the Garage Door Opener

  1. Find the Genie Excelerator II motor unit (usually mounted on the ceiling of your garage).
  2. Look for the “Learn” or “Program” button, typically located near the LED indicator lights.
  3. The button is usually red, purple, or black and is found under the light cover or on the back panel of the unit.

Step 2: Prepare Your Remote for Programming

If you are programming a new remote, make sure:

  • The batteries are fresh and installed correctly.
  • The remote is compatible with Genie Intellicode openers (most newer Genie remotes are compatible).

Step 3: Enter Programming Mode on the Garage Door Opener

  1. Press and hold the “Learn” or “Program” button on the motor unit for about 3 to 5 seconds until the LED indicator light starts blinking.
  2. This means the opener is now in programming mode and ready to sync with the remote.

Step 4: Program the Remote Control

  1. Press and release the button on the remote that you want to program.
  2. The LED light on the opener should flash or turn solid, indicating that the signal has been received.
  3. Press the remote button again to confirm. If the garage door moves, programming was successful.

Step 5: Test the Remote

  • Stand a few feet away and press the programmed remote button.
  • If the garage door opens or closes, the programming was successful.
  • If it doesn’t work, repeat Steps 1-4 to ensure proper syncing.

How to Program a Genie Excelerator II Wireless Keypad

A wireless keypad allows you to open and close your garage door using a PIN code, eliminating the need for a remote. Here’s how to program a Genie Excelerator II wireless keypad:

Step 1: Locate the Learn Button on the Opener

  • Follow the same steps as before to enter programming mode using the “Learn” button.

Step 2: Enter Your Desired PIN

  • On the keypad, enter a 4-digit PIN code of your choice.

Step 3: Sync the Keypad with the Opener

  1. After entering your 4-digit PIN, press the “Program” button on the keypad.
  2. The LED indicator light on the opener should flash, confirming the code was received.
  3. Test by entering the PIN code again and pressing the “Enter” button. If the garage door moves, the keypad was successfully programmed.

How to Program a Genie Excelerator II Wall Console

The wall console is a hardwired control panel mounted inside the garage. If you need to reprogram it, follow these steps:

  1. Ensure the garage door opener is powered on.
  2. Press and hold the “Program” button on the wall console for about 3-5 seconds until the LED light blinks.
  3. Press the desired button on the wall console to sync it with the opener.
  4. The LED light will turn solid, indicating successful programming.
  5. Test the wall console by pressing the button to operate the garage door.

Troubleshooting Programming Issues

If you experience any issues while programming your Genie Excelerator II remote, keypad, or wall console, try the following solutions:

Problem 1: Remote Doesn’t Work After Programming

Solution:

  • Ensure the remote battery is new and properly installed.
  • Repeat the programming steps carefully.
  • Make sure the remote is compatible with Genie Excelerator II.

Problem 2: Wireless Keypad Is Not Responding

Solution:

  • Reset the keypad by removing the batteries for a few minutes.
  • Try re-entering the PIN code and following the programming steps again.

Problem 3: Wall Console Is Unresponsive

Solution:

  • Check the wiring connections on the back of the wall console.
  • Reset the garage door opener by unplugging it for 30 seconds and trying again.

Frequently Asked Questions (FAQs)

1. How Many Remotes Can I Program to My Genie Excelerator II?

You can program up to seven remotes, keypads, or wall consoles to a single Genie Excelerator II garage door opener.

2. Does My Genie Excelerator II Remote Work With Other Genie Openers?

It depends. The remote must be Intellicode-compatible to work with newer Genie models.

3. How Often Do I Need to Reprogram My Genie Garage Door Opener?

You only need to reprogram the opener if:

  • You replace the remote or keypad.
  • There’s a power failure that resets the system.
  • You change your PIN code for security reasons.

4. Where Can I Find Replacement Remotes for My Genie Excelerator II?

You can find Genie-compatible remotes at:

  • Amazon, Walmart, Home Depot, and Lowe’s
  • Official Genie website or authorized dealers

Final Tips for Maintaining Your Genie Excelerator II Garage Door Opener

Replace remote batteries annually for reliable performance.
Keep the opener unit clean to prevent dust buildup affecting the sensors.
Check for firmware updates on newer models to ensure compatibility.
Store backup remotes in a safe place in case of loss or failure.


Conclusion

Learning how to program a Genie Excelerator II garage door opener is a straightforward process that ensures smooth and secure access to your garage. Whether you’re programming a remote, wireless keypad, or wall console, following the correct steps guarantees successful operation.

By maintaining your Genie Excelerator II system properly and addressing any troubleshooting issues, you can enjoy hassle-free garage door access for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top