The Genie Excelerator is known for being one of the fastest and most reliable garage door openers available on the market. However, like any mechanical system, over time it may require maintenance or replacement parts, especially for sensitive components like the Excelerator safety sensors. These sensors are critical for ensuring the safe and reliable operation of your garage door.
Whether you’re experiencing sensor malfunctions, looking to upgrade your existing setup, or simply want to understand the components better, this guide will help you navigate everything about Genie Garage Door Opener Replacement Parts for Excelerator Sensors.
Why Genie Excelerator Sensors Matter
The Genie Excelerator series features some of Genie’s most advanced garage door openers, often praised for speed and quiet operation. One of the key safety features includes infrared safety sensors that prevent the door from closing on objects, pets, or people.
These sensors work by sending an invisible beam of light across the base of the garage door. If something interrupts the beam, the door automatically stops or reverses. When these sensors become misaligned, dirty, or fail, it compromises your entire system’s safety and functionality.
That’s why understanding and sourcing the correct Genie garage door opener replacement parts for Excelerator sensors is so important for homeowners and property managers alike.
Common Problems with Genie Excelerator Sensors
Like any piece of hardware, garage door sensors are subject to wear and environmental damage. Some typical issues include:
1. Sensor Misalignment
This occurs when the sending and receiving sensors are no longer facing each other. This can happen due to vibrations, accidental bumps, or mounting failure.
2. Dirty or Blocked Lenses
Dust, cobwebs, or leaves can block the sensor’s beam, preventing it from functioning correctly.
3. Faulty Wiring
Over time, wires connecting the sensors to the opener may become frayed or damaged, interrupting the signal.
4. Sensor Failure
The sensors may completely fail due to internal circuitry damage, often from power surges or water exposure.
5. Indicator Light Issues
When a sensor stops showing a steady green or red light, that’s a clear sign that replacement may be needed.
Genie Garage Door Opener Replacement Parts for Excelerator Sensors – What You Need to Know
If your Genie Excelerator opener is malfunctioning due to sensor issues, it’s crucial to use the correct replacement parts. Not all Genie sensors are created equal, and using non-compatible or outdated parts can create further issues.
Here’s a breakdown of the key Genie garage door opener replacement parts for Excelerator sensors:
1. Safety Beam Sensor Kits
These are the most direct replacements for faulty sensors. A typical Genie safety beam replacement kit includes:
- One sending sensor
- One receiving sensor
- Mounting brackets
- Wiring harnesses
- Installation instructions
These kits are usually compatible with all Genie garage door openers manufactured after 1993 that use infrared sensors, including the Excelerator models.
Recommended Product: Genie OEM Safe-T-Beam Sensor Kit (Part # 37220R)
2. Sensor Wiring Kits
If the problem lies in damaged wiring rather than the sensors themselves, a wiring kit can solve the issue. These come with pre-cut lengths of wire, terminal connectors, and instructions for re-connecting the sensors to the main opener unit.
Note: Always turn off power before working with wiring to avoid injury or electrical damage.
3. Mounting Brackets and Sensor Housings
Sometimes the sensor is fine, but the mounting bracket or sensor housing is damaged. Replacement brackets ensure proper alignment and secure sensor positioning.
These parts are typically universal but check that they are compatible with Genie sensors before purchasing.
4. Adapter Harnesses for Upgrading Sensors
Older Excelerator models may use different connectors than newer sensor kits. In this case, an adapter harness allows you to use modern Safe-T-Beam sensors with an older system.
This ensures compatibility without the need to replace the entire opener unit.
Where to Buy Genie Sensor Replacement Parts
Finding Genie garage door opener replacement parts for Excelerator sensors is easier than ever with online and in-store options. Here are some trusted sources:
Online Retailers
- Amazon – Offers a wide range of genuine Genie parts with reviews
- Genie Company Official Website – Direct source for OEM components
- eBay – Useful for discontinued or hard-to-find parts
- Home Depot / Lowe’s – Often carry Genie-compatible kits
Local Dealers
- Local garage door installers often carry replacement parts
- Certified Genie service centers may offer installation with purchase
Step-by-Step: Replacing Your Genie Excelerator Sensors
If you’re a DIY enthusiast, replacing your sensors is straightforward. Follow these steps:
Tools Needed:
- Screwdriver
- Wire strippers (if rewiring)
- Drill (if new brackets need installation)
Instructions:
- Unplug the garage door opener to ensure safety.
- Remove the old sensors by unscrewing them from the brackets.
- Disconnect the wires or cut them if corroded or damaged.
- Mount the new sensors using the brackets provided.
- Connect the wiring using the same color codes (usually white and black/white).
- Plug in the opener and test alignment.
- Check sensor lights — they should show solid red/green when properly aligned.
- Test the door function by placing an object in the sensor’s path. The door should reverse when obstructed.
Maintenance Tips for Excelerator Sensors
Maintaining your Genie Excelerator sensors ensures they last longer and work safely. Here are a few tips:
- Clean sensors regularly with a dry cloth
- Avoid spraying water or chemicals near sensors
- Check alignment monthly
- Inspect wiring annually for signs of wear or corrosion
- Test auto-reverse feature periodically for safety compliance
Troubleshooting Genie Excelerator Sensors
If replacing the sensor doesn’t solve the issue, consider the following:
- Check opener’s logic board — it could be faulty
- Inspect garage door track for warping, which might affect alignment
- Ensure power is consistently reaching the opener
- Use a voltage tester to check sensor terminals
If you’re unsure, calling a professional technician familiar with Genie garage door opener replacement parts for Excelerator sensors is a smart choice.
Final Thoughts
When your garage door doesn’t close properly or the sensor lights are blinking inconsistently, don’t panic — the solution may be as simple as replacing or adjusting a sensor. Understanding the Genie garage door opener replacement parts for Excelerator sensors empowers homeowners to fix problems efficiently and restore garage functionality quickly.
Whether you need an entire Safe-T-Beam sensor kit, replacement wiring, or even mounting brackets, sourcing the correct parts is vital. By using genuine Genie components and following proper installation procedures, you ensure that your garage door operates smoothly, safely, and reliably for years to come.
