BMW HomeLink is a universal transceiver that can be programmed to operate a variety of devices, including garage door openers. If you have a Genie garage door opener, you can program your BMW HomeLink to open and close your garage door with the touch of a button.
Programming Instructions
To program your BMW HomeLink to a Genie garage door opener, you will need the following:
- Your BMW vehicle
- Your Genie garage door opener remote control
- A ladder (if your garage door opener has a wall-mounted control panel)
Step 1: Prepare Your BMW
- Park your BMW within range of your garage door opener.
- Turn on the ignition, but do not start the engine.
- Press and hold the 1 and 3 buttons on the HomeLink transmitter until the LED light turns from solid yellow to rapid flashing green.
Step 2: Prepare Your Genie Garage Door Opener
- Locate the Learn button on your Genie garage door opener. This button is usually located on the control panel of the garage door opener itself, or on a separate wall-mounted control panel.
- Press and hold the Learn button until the LED light on the garage door opener starts to flash.
Step 3: Program Your BMW HomeLink
- Press and hold the button on your Genie garage door opener remote control that you want to program to your BMW HomeLink.
- While holding down the button on the garage door opener remote, press and hold the 1 button on the HomeLink transmitter until the LED light on the HomeLink transmitter turns from rapid flashing green to solid green.
Step 4: Test Your BMW HomeLink
- Press the 1 button on the HomeLink transmitter to test your programming.
- If the garage door opens or closes, your programming is successful.
Troubleshooting
If you are having trouble programming your BMW HomeLink to your Genie garage door opener, try the following:
- Make sure that you are within range of your garage door opener.
- Make sure that the batteries in your garage door opener remote control are fresh.
- Try programming a different button on your HomeLink transmitter.
- If you are still having trouble, contact your BMW dealer or Genie customer support.
Conclusion
Programming your BMW HomeLink to a Genie garage door opener is a quick and easy process. Once you have programmed your HomeLink, you will be able to open and close your garage door with the touch of a button.