Do you have a new Alliance Genie garage door opener remote? If so, you will need to program it before you can use it.
In this article, we will show you how to program an Alliance Genie garage door opener remote. We will also provide some tips for troubleshooting common problems.
What You Will Need
- A ladder
- A Phillips head screwdriver
- Your Alliance Genie garage door opener remote control
- The owner’s manual for your garage door opener
Instructions
- Locate the learn button on your garage door opener. This is usually a small button located near the motor unit.
- Press and hold the learn button until the LED light on the garage door opener flashes.
- Press and hold the button on your remote control that you want to program.
- The LED light on the garage door opener will stop flashing when the remote is programmed.
- Repeat steps 3 and 4 for each additional remote that you want to program.
Tips
- If the LED light on the garage door opener does not flash when you press the learn button, check the batteries in your remote control.
- If you are still having problems programming your remote, you may need to consult the owner’s manual for your garage door opener.
Alliance Genie Garage Door Opener Remote
In this section, we will provide more detailed instructions on how to program an Alliance Genie garage door remote.
Step 1: Locate the Learn Button
The first step is to locate the learn button on your garage door opener. This is usually a small button located near the motor unit.
Step 2: Press and Hold the Learn Button
Press and hold the learn button until the LED light on the garage door opener flashes.
Step 3: Press and Hold the Button on Your Remote Control
Press and hold the button on your remote control that you want to program.
Step 4: The LED Light Will Stop Flashing
The LED light on the garage door opener will stop flashing when the remote is programmed.
Step 5: Repeat for Additional Remotes
Repeat steps 3 and 4 for each additional remote that you want to program.
Troubleshooting
If the LED light on the garage door opener does not flash when you press the learn button, check the batteries in your remote control.
If you are still having problems programming your remote, you may need to consult the owner’s manual for your garage door opener.
